EMCU-HomeAutomation.org

Home Automation & C (by: E.Marinoni)

Skip to content

Home
- Interesting links
Home & Car alarm
- Very simple Alarm System for Home, Van, Motor Home, etc
- GA09 – GSM Alarm Device
- TRACKTING SMART Europa (SIM Internazionale)
- Show in our Home Assistant the status of Burglar Alarm
- On/Off from Home Assistant your Burglar Alarm (and also from your mobile phone)
- VAN and/or Camper anti theft (alarm) using a SIM Router (RUT360) and Shelly Plus Uni + monitor the Temperature, Humidity and Voltage
Node-RED
Home Automation
- Home automation: BASICS
- Shelly EM (X1) – for measure consumption of your home
- How to use RING Intercom in alternative applications
- Monitor the power supply of your home via Home Assistant
- Monitor the rain for decide the ON/OFF of the irrigation, for Home Assistant
- Professional control system for control the water level (dark waters) in Home Assistant (ZigBee)
- Pump control the water level (dark waters) in Home Assistant (ZigBee)
- Automation for control lighting via PIR and button (TurnOn/TurnOff) for car box
- Automatic Gate
- Car Parking Assistant – STM32 + ARDUINO ide
- PIR sensor based on: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111
iHOST by SonOff
- SonOff iHost quick introduction
- Node-RED e eWeLink Smart Home, estensioni/extension per/for iHost
- TailScale for remote access to iHost
- How to turn off your smart bulbs in case of power failure for iHost (SonOff) and Home Assistant
- iHost sed email using Node-RED
Home Assistant
- Introduction to Home Assistant – (hassio)
- Home Assistant tips and tricks
- Suggested kit for install Home Assistant
- Remotely access to Home Assistant (from Internet)
- Text or File editor
- ConBee II, ZigBee USB Gateway
- How to Update or verify the deCONZ firmware under Home Assistant
- How to ADD new device to ConBee II – ZigBee USB Gateway
- Introduction to Home Assistant (HA) Automation
- Third party add-on or plug-in for Home Assistant (HA)
- How to turn off your smart bulbs in case of power failure for iHost (SonOff) and Home Assistant
- Integrate Tuya objects (switches, sockets, sensors, etc. ) in Home Assistant
- How to enable some automation only during the night
- Home Assistant send message via TELEGRAM
- Example that turn on the home entrance light if is night using the Xiaomi Motion sensor and Shelly 1
- ESPHome for drive EPS8266-01s or EPS8266-01 in Home Assistant
- Osram Smart+ (LED bulb Zigbee) & Home Assistant
- Home Assistant – Automation for Garden Irrigation
Garden
- Garden basic tools
- Fertilizers and Insect defenses for the garden
- Irrigation
WireLess
- Antenna
- Radio
  - Interesting Links regarding RADIO
  - AOR – AR3000 & AR3000A
- TAG – NFC – RFID
  - Transponder controlled lock-unlock key
  - NFC proximity tag and Home Assistant
- Telephone dialer (GSM telecom network)
  - GA09 – GSM Alarm Device
- TELTONIKA router RUT360 4G LTE CAT 6
- Sub1Ghz
- ZigBee
- WiFi
- Comparison: ZigBee – WiFi – BlueTooth – UWB
- Surveillance Cameras and Video Intercoms
- Mobile Operators
  - Identificativo MCC MNC degli operatori mobili Italiani
- Brief Introduction to the signals modulation
Internet
- Network informations
- Internet Interesting tools
- What means CAT 1, 3, etc, Band 3, 7, etc and Carrier Aggregation (Internet Key and Wireless Router)
- A solution for reach a good and stable Internet connection
- TENDA MW12-3 Wi-Fi Mesh Tent, Tri-band, 3 Gigabit Ports, Wi-Fi Coverage up to 560 SQM, Supports 100 Connected Devices, Alexa Compatible
- D-Link
  - DSP-W215 mydlink™ Home Smart Plug – How to connect it to your ADSL modem
- FastWeb
  - FastWeb + Fritz Box 7390 + Huawei B525s-23a
  - FastWeb + Fritz Box 7390 + Huawei E3372 (in Italian language)
- Fritz
  - Fritz! wlan repeater n/g
- Huawei
  - Huawei B525s-23a – 4G, LTE (CAT6), WLAN Router, with WiFi at 2.4 and 5 GHz
- TP-LINK
Interesting automation kits
- Automation cards for gate
- Home burglar alarm for home
  - Theft Protection – DIGOO DG-HAMA All Touch Screen Alexa Version 433MHz 2G&GSM&WIFI DIY Smart Home Security Alarm System Kits – Black
  - GSM telephone dialer
- Development Board, Wiring, Button, etc
- Display
  - SSD1306 I2C OLED display and NUCLEO-L053R8 board
- PIR sensor
  - PIR sensor based on: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111
- Radio Controlled
- Temperature controller
- Timer
  - Timer – YOUTHINK Mod: TM601F
  - Timer – Electraline 58107 – Come programmarlo (in Italian language)
NAS
- NAS – SYNOLOGY DS218J
- Sync a Directory from local PC to your local Synology NAS
Air conditioning & C
- Samsung Wind Free – How to configure a dual split
TV & C
- TV and DVB-T2
Electronic Equipment & Boards
- NanoVNA – antenna analyzer
- Open Bench Logic Sniffer
- General purpose instrumentations
- Laboratory tools
Portable Power Station
- Elecaenta MARS EM200 – Portable Power Station
- ECOFLOW RIVER 2 Pro portable power station 768Wh continuous, X-Boost or peak of 1600 W
- EcoFlow DELTA 2 portable power station from 1 to 3KWh
3D Printer
- Tutto quanto c’è da sapere su 3D Printer Creality Ender 3 (in Italian language)
- Configure Ultimaker CURA software for use the Creality 3D printer model ENDER 3
- How to test a filament for your 3D printer
- Differences between PLA and ABS
- Resins to finish the 3D printed pieces
- TinkerCAD – useful for 3D printers
- 3D objects
Bicycles, Motorhome, Camper, Van – etc.
- Bike
- Motorhome, Camper and VAN
- Vastar Compressore Portatile con LCD per Moto, Auto, Bicicletta e Palloni
- Car Parking Assistant
References
- Old electronics magazines
- Acronyms
- Android
  - How to use Android Studio
  - FTDI – Android Support Page
- Connectors
  - Standard Connectors
  - USB – BNC – Jack, etc connectors
- CAD
- C & C++ language
- Electronic Components
- Linux
- MAC address
- MCU architecture
  - Stack & Heap
- RISC-V
  - RISC-V vs ARM
- Cortex Mx
- KEIL
  - MDK KEIL COMMUNITY EDITION
- GD32
- STM32
- Python
- Serial to USB
  - How to use the Serial to USB converter – STEVAL-PCC018V1
  - Terminal Emulator
- Prese Telefoniche Italiane, Cavi Ethernet, Crimpatrici e collegamenti
PC & Printer
- BalenaEtcher – Flash OS images to SD cards & USB drives
- How to install the HP LaserJet Pro MFP M26a on UBUNTU
- How to use STM32CubeIDE for write a C code for your PC under Linux
Funny
- How to make, from a shoe box, a fun box
- 4WD Robot Car
- How to use the Adafruit Motor Shield on STM32 NUCLEO
About
- Who I’m
- Casato dei Marinoni
Privacy
- Informativa estesa riguardante il dominio: www.emcu-homeautomation.org
Contact

Tag Archives: Motorhome

Dometic refrigerator mod. RML 10.4S, tips and tricks

Posted on December 10, 2023 by wp_2592768

For more info see here.

Posted in Motorhome, VAN | Tagged Motorhome | Comments Off on Dometic refrigerator mod. RML 10.4S, tips and tricks

Search for:
Recent Posts
Recent Comments

Archives
Categories
- 3D Printer
- Automation
- Bike
- CAR
- Compiler
- Connectors
- Eclipse
- Espressif
- Gardening and Vegetable Garden
- Gate and Door Automation
- GCC
- GD32
- GDB
- Home Assistant
- Internet
- Irrigation
- ITALY
- KEIL
- Linux
- Motorhome
- NAS
- PC
- Sensors
- Shelly
- SonOff
- STM32
- Temperature controller
- Theft Protection
- TV
- Uncategorized
- VAN
- Video
- ZigBee
Meta

EMCU-HomeAutomation.org Privacy Policy

Proudly powered by WordPress.