Category Archives: Home Assistant
Temperature/Humidity sensor, Relay ZigBee and Zigbee 3.0 Gateway 2 relay with RF 433 MHz tested into iHost
For more info see here.
How to turn off your smart bulbs in case of power failure for iHOST and for Home Assistant
Come spegnere le lampadine intelligenti in caso di interruzione di corrente per iHOST e per Home Assistant For learn more see here.
On/Off from Home Assistant your Burglar Alarm (and also from your mobile phone)
The idea is to implement a remote On/Off of our Burglar Alarm using a simple automation in our Home Assistant and also from your mobile phone.For more info see here.
Show in our Home Assistant the status of Burglar Alarm
For more info see here.
How to How to Update or verify the deCONZ firmware under Home Assistant
To verify the deCONZ installed software or of for update it follow the easy explanations show here.
Alexa or Home Assistant and P-NUCLEO-WB55
Thanks to P-NUCLEO-WB55 and ZigBee stack, is possible connect the P-NUCLEO-WB55 with Home Assistant and/or Alexa.Also is possible connect P-NUCLEO-WB55 theoretically with all ZigBee 3.0 hub, we tested only the compatibility with Home Assistant and Alexa.For more info see here.
Integrate Tuya objects (switches, sockets, sensors, etc. ) in Home Assistant
In this tutorial we explain how to integrate a Tuya Smart Relay WIFI & Sub1Ghz in Home Assistant.This explanation is valid for any Tuya switches, sockets, sensors, etc.For more info see here.
Professional control system for control the water level (dark waters) in Home Assistant (ZigBee)
For more info see here.
Monitor the rain for decide the ON/OFF of the irrigation, for Home Assistant
For more info see here.
Sensore di pioggia per Home Assistant (in Italian language)
Per maggiori dettagli vedere qui.